Item 216PEG - PEG sensor for Aprilia RSV 4/Tuono V4

3548 SEK
Excl. tax
216PEG - Cordona PQ 8 Peg Version Quickshifter Aprilia RSV 4 / Tuono V4
Our Quickshifter for bikes with shift pedal. To use for all bikes which have no shift rod to include the sensor even MX bikes and Super Motard bikes, just another modell for those (416).

With all the latest technology, continuously developed and upgraded.
Compu Shift, calculates a perfect kill time for each up shift according to engine conditions, acceleration, load and rpm with a selection of 500 different kill times. Adjustable between 40-80ms.

Makes the ECU believe the engine is still running at up shift; allows for a very smooth and stable up shift without any fault messages or leaned or enriched fuelling.
Comes with plug and play connectors for Denso and Mitsubishi coils, used on most sport bikes. For other coils the installation is not plug and play, still an easy straight fwd. installation though, hardware for splicing is included. Automatic rpm controlled ON/OFF, fully adjustable, to prevent the engine from stopping when put in neutral from 1st gear while at idle.

Will pick +12v from a coil via the red wire going straight to the PQ8 CPU on bikes with stick coils, making for an easy installation, no need to install a 12v wire on bikes with stick coils.

Has “Smooth Shift” built in to ease the shock loads on the gear box and chain and to lessen loss of traction at up shift, just like the Moto GP shifters. It kills all cylinders simultaneously at up shift but bring them back on in a computer controlled sequence, in conjunction with Compu Shift.
Waterproof design, the circuit board is encased in glue, aviation grade 26 pin connector.
Aural horn for test and start up acknowledgement if hidden behind fairings, very useful for set up.

Shift Light circuitry built in, with shift soon functions,
LED will come on for 1000rpm before up shift rpm and then flash in sequence with the rpm. RPM is set with 3 digits in steps of 100rpm. LED assembly sold separately, Batwing Shiftlight.

Auto Shift, can be selected to activate the shifter automatically at an adjustable rpm. The rider just has to keep the shifter pedal preloaded between up shifts. Useful for drag racers going below the break out time, just reduce the up shift RPM to go slightly slower next run.

Delivery: What's in the kit? The Pq8 kit includes The CPU, strain gauge switch, Plug and play wiring harness and velcro for mounting blackbox. Delivery direct from the distributor

Suitable for follwing vehicles:
Vehicle   Model  -Year
Aprilia RSV 4 Factory -2009
Aprilia RSV 4 Factory -2010
Aprilia RSV 4 Factory APRC 2011-2012
Aprilia RSV 4 Factory APRC ABS -2013-2014
Aprilia RSV 4 R2010 -2012
Aprilia RSV 4 R ABS 2013-2014
Aprilia RSV 4 RF -2015-
Aprilia RSV 4 RR -2015-